Mould in Your Aircon: Health Risks and How to Get Rid of It

Where mould grows inside your aircon, the health risks health agencies describe, what you can clean safely and when a chemical wash is needed.
Mould in Your Aircon: Health Risks and How to Get Rid of It | Wei Wei Aircon
11.19.2026

Mould in an aircon grows on the damp blower wheel, coil, drain pan and louvres, and it can release spores into the room every time the unit runs. Health agencies link damp, mouldy indoor conditions to coughing, wheezing, nasal and eye irritation, and worse asthma, especially for people with allergies or weak immunity. Wiping the louvres and washing the filters helps, but mould inside the blower and coil needs a professional chemical wash or overhaul to remove properly.

Black spots on the louvres are usually the first thing people notice, often while lying in bed looking up at the aircon. In Singapore’s humid climate, almost every aircon that runs daily will grow some mould eventually. This guide explains where it grows, what the health risks are, what you can safely clean yourself and when the unit needs a deeper clean.

Why Aircon Mould Is So Common in Singapore

Mould needs moisture, warmth and something to feed on. An aircon in Singapore gives it all three. The indoor coil pulls water out of the air all day, the drain pan holds a film of water, and dust caught in the unit provides food.

The outdoor air does not help. The Meteorological Service Singapore gives a mean annual relative humidity of around 82%. The US Environmental Protection Agency advises keeping indoor humidity below 60% to limit mould, and ideally between 30% and 50%, as explained in its guide to mould and moisture at home. When the aircon switches off at night and the wet coil sits in warm room air, conditions inside the unit are ideal for growth.

Where Mould Grows Inside Your Aircon

  • Louvres and air outlet. The visible black or green spots. Cold, damp air passes over them constantly.
  • Blower wheel. The long cylindrical fan behind the louvres. This is usually the worst spot, and the most important one, because every bit of air leaving the unit passes through it.
  • Evaporator coil. The fins behind the filters stay wet during operation and trap dust that mould feeds on.
  • Drain pan. Standing water mixed with dust forms slime that can block the drain and smell.
  • Filters. Dust-clogged filters can hold moisture and grow mould on their own.

If you can see mould on the louvres, assume there is more on the blower wheel behind them. Shine a torch into the air outlet and you will often see dark build-up on the fan blades.

Health Risks of Aircon Mould

When the fan runs, it can blow spores and fragments of mould into the room. Not everyone reacts the same way, and the US Centers for Disease Control and Prevention notes that exposure to damp and mouldy environments may cause a range of health effects, or none at all.

Common reactions

The CDC lists nasal stuffiness, throat irritation, coughing or wheezing, eye irritation and, in some cases, skin irritation as common reactions. Many people notice that symptoms are worse in the bedroom or soon after switching the aircon on.

Who is most at risk

  • People with asthma or mould allergies. The CDC notes they may have more severe reactions.
  • People with weakened immune systems or chronic lung disease. They are at higher risk of lung infections from mould.
  • Young children and the elderly. They often spend long hours in air-conditioned bedrooms.

What the WHO says about damp and mould

The World Health Organization’s guidelines on dampness and mould conclude that the most important effects of damp and mouldy indoor conditions are more respiratory symptoms, allergies and asthma, and that preventing persistent dampness and microbial growth is the most effective way to avoid these effects.

We are an aircon company, not doctors. If you or a family member have ongoing breathing or allergy symptoms, see a doctor. Cleaning the aircon removes one possible source, but it is not a medical treatment.

How to Check Your Aircon for Mould

  1. Switch off the unit at the isolator.
  2. Look at the louvres. Black, green or grey speckles are a clear sign.
  3. Shine a torch into the air outlet. Look at the blower wheel blades for dark, furry or slimy build-up.
  4. Open the front panel and check the filters and coil. Heavy dust, dark patches or slime on the coil fins point to growth.
  5. Use your nose. A musty, damp smell when the unit starts up is a common sign of mould and bacteria inside.

Other clues include black flecks blowing out of the vents, weaker airflow and water dripping from the indoor unit. Our post on the signs your aircon needs cleaning covers the full list.

Aircon Cleaning You Can Do Yourself, and Its Limits

Some cleaning is safe for homeowners and worth doing regularly:

  • Wash the filters with water and mild soap, then dry them fully in the shade before putting them back.
  • Wipe the louvres and front panel with a damp cloth and mild detergent, with the power off.
  • Wear a mask if there is visible mould, and open the window while cleaning.

What you cannot safely do yourself is clean the blower wheel and coil properly. Spraying household cleaners or bleach into the unit can damage the coil fins and plastic parts, leave residue that gets blown into the room, and drip onto the circuit board. Scrubbing the visible part of the blower wheel also only reaches the front few blades. The mould deeper inside stays, and it grows back quickly.

Aircon Cleaning vs Aircon Chemical Wash: Which Removes Mould?

Option What it cleans When it fits
General servicing Filters, front panel, accessible coil surface, drain line flush Light dust, no visible mould on the blower
Chemical wash Coil and blower cleaned with suitable chemicals, drain pan cleaned Visible mould on louvres or blower, musty smell
Chemical overhaul Indoor unit dismantled, parts cleaned individually Heavy mould, slime, repeated smell or leaking

When an aircon chemical wash is the right choice

If you can see mould on the blower wheel or the unit smells musty every time it starts, routine servicing is usually not enough. An aircon chemical wash uses cleaning chemicals made for coils and blowers to break down the build-up, then rinses it out. For units with very heavy growth, an overhaul, where the indoor unit is dismantled so every part can be cleaned, gives the most thorough result.

How often a chemical clean is needed depends on usage and environment. Our post on how often to do aircon chemical cleaning covers the usual intervals.

How to Stop Mould Coming Back

  • Keep up with servicing. Regular aircon servicing keeps filters, coil and drain clean, so mould has less to feed on.
  • Dry the unit before switching off. Running fan mode for a while before switching off helps dry the coil. Some units have a dry or self-clean function that does this automatically.
  • Do not let filters clog. Wash them every few weeks if the aircon runs daily.
  • Control room humidity. Avoid drying laundry in an air-conditioned room, and air out bathrooms properly.
  • Fix leaks early. A blocked drain keeps the unit wet, which encourages growth.

For more on keeping the air in your home healthier, see our guide on improving indoor air quality with your air conditioning.

How Wei Wei Aircon Handles Mouldy Aircons

We have been cleaning and servicing aircons in Singapore for over three decades, across all major brands and unit types. When a customer tells us about mould, we inspect the louvres, blower and coil first, then recommend the level of cleaning the unit actually needs, whether that is general servicing, a chemical wash or an overhaul.

We explain what we found, give a clear quote before work starts, and show you the unit after cleaning. If the mould keeps returning quickly, we also look for underlying causes like a choked drain or a unit that never dries out.

Frequently Asked Questions

Is black mould in my aircon dangerous?

Mould in an aircon can trigger coughing, sneezing, eye irritation and asthma symptoms, especially in people with allergies, asthma or weak immunity. Not everyone reacts, but it is best not to leave it. Have the unit cleaned and see a doctor if symptoms persist.

Can mould in the aircon make you sick?

It can cause allergy-type reactions and worsen asthma in sensitive people, according to the CDC and WHO. People with weakened immune systems or lung conditions face higher risks. Cleaning the unit removes a possible source of exposure.

Can I clean aircon mould myself?

You can wash the filters and wipe the louvres safely. The blower wheel and coil, where most mould grows, need professional tools and chemicals to clean properly without damaging the unit.

Does general servicing remove aircon mould?

General servicing handles light dust and keeps the drain clear, but it does not deep clean the blower wheel. If you can see mould on the blower or smell it on start-up, a chemical wash or overhaul is usually needed.

How do I know if my aircon has mould?

Look for black spots on the louvres, dark build-up on the blower wheel when you shine a torch into the outlet, and a musty smell when the aircon starts. Black flecks blowing out of the vents are another sign.

Why does mould keep coming back in my aircon?

Mould returns when the unit stays wet and dirty: clogged filters, a choked drain, or the coil never drying out. Regular servicing, washing the filters and letting the unit dry before switching off all help.

Book Your Aircon Servicing Today

Enjoy guaranteed workmanship, clear quotes, and expert care from Wei Wei Aircon.

  • Phone: +65 6567 7698
  • Location: 451 Jurong West Street 42, #01-180, Singapore 640451
  • Operating Hours: Mon-Sat: 9:00 AM – 6:00 PM

Send Us a Message

You can schedule an appointment or send us your enquiry by filling up the form, or simply give us a call. 

6567 7698

Related Posts

Call Now Button